Translate

Bowin P8

Bowin P8, driven by John Leffler
The Bowin P8 was a Formula 5000 and Formula 2 class of race car, which was designed and built by John Joyce, the founder of Bowin Cars.

Specifications

Several Bowin vehicles at the starting line of a track. The P8 is in the center of the first row.
The chassis was a high-rigidity monocoque design of high-strength alloy and steel, utilising the latest techniques in assembly, with emphasis placed on ease of maintenance and repair. This supported a body which was a full aerodynamic wedge, incorporating side radiators. The interior of the cockpit was covered in fully moulded seat and trim sections, making it exceptionally comfortable and roomy.
The rear suspension incorporated twin radius arms, parallel links, Armstrong adjustable dampers, and fully adjustable spherical bearings throughout. The front suspension was a double-wide-based wishbone design with Armstrong adjustable dampers and fully adjustable spherical bearings throughout. The coil spring units for both front and rear were mounted inboard with "Bowin variable rate spring control".
The P8 was steered by a cam-adjustable magnesium rack and pinion designed by Bowin, with an energy absorbing steering column surmounted by a leather-covered steering wheel. The brakes were Girling 24.8 cm (9.75 in) disc brakes with alloy caliper assemblies. The twin braking system was adjustable for length and had an adjustable-ratio balance control. The rear brakes were mounted inboard on the gearbox to reduce unsprung weight. The wheels were magnesium, with 25 cm × 33 cm (10 in × 13 in) in the front and 30 cm × 33 cm (12 in × 13 in) or 36 cm × 33 cm (14 in × 13 in) in the rear.
It had a wheelbase of 240 cm (93 in), a track of 155 (front) and 160 (rear), and a weight of 360 kg (800 lb) (including the twin cam engine).
The transmission was a Hewland FT2000, providing five speeds and reverse, and it had an alloy adaptor plate. The hydraulic clutch system was complete, up to and including the release mechanism on the gearbox.
The engine was water-cooled by twin, cross-flow, lightweight, side-mounted radiators, with a deaireator control tank and pressure cap. The alloy oil tank was incorporated in the monocoque body and was fitted with antisurge baffles, a deaireator system, alloy pipes, hoses and fittings, and an alloy oil cooler. Fuel was contained in cells in the side panels. Each side had a capacity of 14 US gal (53 l) with a dedicated filter and breather. The P8 was supplied with engine mountings.
The electrical system was powered by a 12 volt, lightweight, aircraft battery, which had a master battery control. It powered a starter solenoid via starter button and switches, as well as an array of instruments, including tachometer (0–10,000 rpm), oil pressure, water temperature, and oil temperature.
All suspension parts were in new Bowin Satin finish, and the other parts were cadium-plated and stove-enamelled. The body was painted in a colour of the customer's choice.


Back to Bowin Cars
Last updated on 13 September 2011 at 03:48.

0 comments:

Back to Top