Translate

Škoda 1203

Škoda 1203, Škoda 1203 M, TAZ Š 1203 and TAZ 1500 was a car from 1968 to 1999 was produced in Vrchlabí and Trnava AZV Škoda and TAZ. The vehicle is still produced by Ocelot Apparel, a small manufacturer located in Žacléř in the Czech Republic. Plans for production sores first compiled in 1956. Political problems in Czechsolvakia Was the reason for the delayed production until 1968. The Škoda 1202 serves as the technical basis of the vehicle. There were a few changes during the production run, most of which have to do with the engine.
Type
Škoda 1203
Škoda 1203 M, TAZ-Š 1203
TAZ 1500
Engine
water-cooled four-cylinder inline OHV petrol engine, cast iron front longitudinally mounted, firing order 1-3-4-2
Power
47 PS (35 kW) at 4600 min−1
57 PS (42 kW) at 4500 min−1
Cubic capacity
1221 cc
1433 cc
Bore × stroke
72 × 75 mm
72 × 88 cm
Carburetor
Two-chamber Carburetor Jikov 32 BS-14 (since 1974)
Two-chamber Carburetor Jikov 32 SEDR
Torque at 1/min
88 Nm at 3000 4600 min−1
105 Nm at 2500 4600 min−1
Transmission
4-speed, 2. to 4. synchronized (since 1986 also 5-speed)
5-speed
Clutch
dry, single
Top speed
90–95 km/h
110–115 km/h
Acceleration 0–80 km/h
40 s
30,23 s
Tank capacity
40 L
Consumption at 60 km/h
ca. 10–12 liter/100 km
Electrical
12 Volt, alternator 300 watt, battery 50 Ah
Body
self-supporting all-steel
Front axle
Gauge 1360 mm
Brakes front
Drum brakes (since 1986 disc brakes)
Rear axle
Gauge 1350 mm
Breakes back
Drum brakes
Tires
6,40 – 15 „Extra Transport“
Turn radius
10 m
Wheelbase
2320 mm
Length × wide × height
4520 × 1800 × 1900 mm
Empty weight
1130–1280 kg
Construction period
1968–1985
1981–1999
Back to Škoda
Last updated on 11 July 2013 at 16:18.

0 comments:

Back to Top